This archive contains the source code of VeraCrypt.
It is based on the original TrueCrypt 7.1a with security enhancements and modifications.
Important
You may use the source code contained in this archive only if you accept and
agree to the license terms contained in the file 'License.txt', which is
included in this archive.
Note that the license specifies, for example, that a derived work must not be
called 'TrueCrypt' or 'VeraCrypt'
Contents
I. Windows
II. Linux and Mac OS X
III. FreeBSD and OpenBSD
IV. Third-Party Developers (Contributors)
V. Legal Information
VI. Further Information
I. Windows
Requirements for Building VeraCrypt for Windows:
A detailed guide on how to build VeraCrypt on Windows can be found in
the documentation in the repository and
it is also available online or on the mirror.
IMPORTANT:
The 64-bit editions of Windows Vista and later versions of Windows, and in
some cases (e.g. playback of HD DVD content) also the 32-bit editions do not
allow the VeraCrypt driver to run without an appropriate digital signature.
Therefore, all .sys files in official VeraCrypt binary packages are digitally
signed with the digital certificate of the IDRIX, which was issued by
GlobalSign certification authority. At the end of each official .exe and
.sys file, there are embedded digital signatures and all related certificates
(i.e. all certificates in the relevant certification chain, such as the
certification authority certificates, CA-MS cross-certificate, and the
IDRIX certificate).
Keep this in mind if you compile VeraCrypt and compare your binaries with the
official binaries. If your binaries are unsigned, the sizes of the official
binaries will usually be approximately 10 KiB greater than the sizes of your
binaries (there may be further differences if you use a different version of
the compiler, or if you install a different or no service pack for Visual
Studio, or different hotfixes for it, or if you use different versions of
the required SDKs).
Instructions for Signing and Packaging VeraCrypt for Windows:
First, create an environment variable 'WSDK81' pointing to the Windows SDK
for Windows 8.1 installation directory.
The folder "Signing" contains a batch file (sign.bat) that will sign all
VeraCrypt components using a code signing certificate present on the
certificate store and build the final installation setup and MSI package.
The batch file assumes that the code signing certificate is issued by
GlobalSign. This is the case for IDRIX's certificate. If yours is issued by
another CA, then you should put its intermediate certificates in the "Signing"
folder and modify sign.bat accordingly.
To generate MSI packages, WiX Toolset v3.11 must be installed.
VeraCrypt EFI Boot Loader:
VeraCrypt source code contains pre-built EFI binaries under src\Boot\EFI.
The source code of VeraCrypt EFI Boot Loader is licensed under LGPL and
it is available at https://github.com/veracrypt/VeraCrypt-DCS.
For build instructions, please refer to the file src\Boot\EFI\Readme.txt.
II. Linux and Mac OS X
A detailed guide on how to build VeraCrypt on Linux can be found in
the documentation in the repository and
it is also available online or on the mirror.
Requirements for Building VeraCrypt for Linux and Mac OS X:
Instructions for Building VeraCrypt for Linux and Mac OS X:
Change the current directory to the root of the VeraCrypt source code.
If you have no wxWidgets shared library installed, run the following
command to configure the wxWidgets static library for VeraCrypt and to
build it:
$ make WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild
The variable WX_ROOT must point to the location of the source code of the
wxWidgets library. Output files will be placed in the './wxrelease/'
directory.
To build VeraCrypt, run the following command:
$ make
or if you have no wxWidgets shared library installed:
$ make WXSTATIC=1
If successful, the VeraCrypt executable should be located in the directory
'Main'.
Reproducible build note: when SOURCE_DATE_EPOCH is not set, a build from a
git checkout uses the HEAD commit timestamp, while a build from a release
tarball uses the release date in src/Common/Tcdefs.h at 00:00 UTC. To
reproduce official release artifacts from a git checkout, set
SOURCE_DATE_EPOCH explicitly or build from the release tarball. Vendored
VeraCrypt sources tracked in another git checkout are treated the same way and
use that checkout's HEAD timestamp.
Both the generated .deb and .rpm packages are reproducible, including on older rpm (e.g. CentOS/RHEL 7) that lacks the SOURCE_DATE_EPOCH/_buildhost build macros.
By default, a universal executable supporting both graphical and text user
interface (through the switch --text) is built.
On Linux, a console-only executable, which requires no GUI library, can be
built using the 'NOGUI' parameter:
$ make NOGUI=1 WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild
$ make NOGUI=1 WXSTATIC=1
Arch Linux package build:
Arch Linux users can build and install a package from the current checkout with
makepkg:
$ cd src/Build/Packaging/arch
$ makepkg -si
On MacOSX, building a console-only executable is not supported.
Mac OS X specifics:
Under MacOSX, the latest installed SDK is used by default. To use a different version
of the SDK when building using make, you can export the environment variable VC_OSX_SDK:
$ export VC_OSX_SDK=13.0
For development dependencies management, you can use homebrew.
$ brew install pkg-config yasm wxwidgets
You also need system dependencies
$ brew install --cask macfuse packages
After installing dependencies via brew, you can build a local development build
$ ./src/Build/build_veracrypt_macosx.sh -b
If you want to build the package, you must pass -p to the build script above. The built
executable will be in .src/Main
If you prefer to build from sources, or without homebrew, pkg-config and packages must be installed.
Get pkg-config from https://pkgconfig.freedesktop.org/releases/pkg-config-0.29.2.tar.gz and
compile using the following commands:
$ CFLAGS="-Wno-int-conversion" CXXFLAGS="-Wno-int-conversion" ./configure --with-internal-glib
$ make
$ sudo make install
After making sure pkg-config is available, download and install macFUSE from
https://macfuse.github.io/
The build_veracrypt_macosx.sh script performs the
full build of VeraCrypt including the creation of the installer pkg. It expects
to find the wxWidgets 3.2.5 sources at the same level as where you put
VeraCrypt sources (i.e. if "src" path is "/Users/joe/Projects/VeraCrypt/src"
then wxWidgets should be at "/Users/joe/Projects/wxWidgets-3.2.5")
The make build process uses Code Signing certificates whose ID is specified in
src/Main/Main.make (look for lines containing "Developer ID Application" and
"Developer ID Installer"). You'll have to modify these lines to put the ID of
your Code Signing certificates or comment them out if you don't have one.
Because of incompatibility issues with macFUSE, the SDK 10.9 generates a
VeraCrypt binary that has issues communicating with the macFUSE kernel extension.
Thus, we recommend using a different macOS SDK version for building VeraCrypt.
The Packages installer that is used for the VeraCrypt official build has been notarized by IDRIX and it is available at
https://github.com/idrassi/packages/releases
III. FreeBSD and OpenBSD
FreeBSD is supported starting from version 14.
OpenBSD is supported starting from version 7.8.
The build requirements and instructions are the same as Linux except that gmake
should be used instead of make.
IV. Third-Party Developers (Contributors)
If you intend to implement a feature, please contact us first to make sure:
- That the feature has not been implemented (we may have already implemented
it, but haven't released the code yet).
- That the feature is acceptable.
- Whether we need the help of third-party developers with implementing the feature.
Information on how to contact us can be found at:
https://veracrypt.jp or
https://veracrypt.io (mirror)
This software as a whole:
Copyright (c) 2026 AM Crypto. All rights reserved.
Portions of this software:
Copyright (c) 2026 AM Crypto. All rights reserved.
Copyright (c) 2013-2025 IDRIX. All rights reserved.
Copyright (c) 2003-2012 TrueCrypt Developers Association. All rights reserved.
Copyright (c) 1998-2000 Paul Le Roux. All rights reserved.
Copyright (c) 1998-2008 Brian Gladman, Worcester, UK. All rights reserved.
Copyright (c) 1995-2023 Jean-loup Gailly and Mark Adler.
Copyright (c) 2016 Disk Cryptography Services for EFI (DCS), Alex Kolotnikov
Copyright (c) 1999-2023 Dieter Baron and Thomas Klausner.
Copyright (c) 2013, Alexey Degtyarev. All rights reserved.
Copyright (c) 1999-2016 Jack Lloyd. All rights reserved.
Copyright (c) 2013-2019 Stephan Mueller [email protected]
Copyright (c) 1999-2023 Igor Pavlov
For more information, please see the legal notices attached to parts of the
source code.
Any trademarks contained in the source code, binaries, and/or in the
documentation, are the sole property of their respective owners.
https://veracrypt.jp
https://veracrypt.io (mirror)
VeraCrypt 是一款免费的磁盘加密软件，基于 TrueCrypt 开发，并加入了额外的安全增强功能。你可以用它创建加密的虚拟磁盘，也可以加密整个分区和系统驱动器。