Topics / #diy

Diy projects on GitHub

Do-it-yourself projects combining hardware and software

As of , the most-starred Diy projects on GitHub are espectre (9.7K stars), MicroManipulatorStepper (2.2K stars) and xgoduck_hardware (1.7K stars). GitHub.Locker tracks 5 Diy repositories with 14.3K stars combined. The fastest-growing on October 31 was xgoduck_hardware, with +34 stars in a day.

5Projects
14.3KStars in total
+47Stars in a day
Browse in the catalog →github.com/topics/diy ↗

Hot right now

Most stars gained in a day · Oct 31

+34

xgoduck_hardware

LuwuDynamics/xgoduck_hardware · ★ 1.7K

XGO-Duck is a 3D-printable biped robot duck. This repository is the hardware starting point: STL models for the structure, PCB/Altium files for a custom expansion board, a bill of materials, and an illustrated assembly guide.

+6

espectre

francescopace/espectre · ★ 9.7K

ESPectre turns a supported ESP32 into a private, local Wi-Fi motion sensor: it reads how movement changes the Wi-Fi signals in a room and reports motion in real time — no camera, microphone, wearable, or dedicated radar hardware needed.

+4

keybytes

notaroomba/keybytes · ★ 420

Keybytes is an open-source modular mechanical keyboard where every key is its own tiny replaceable PCB (a Keybit) with a built-in RISC-V microcontroller, connected via pogo pins and held together by magnetic cases, with Bluetooth and USB support.

+2

MicroManipulatorStepper

0x23/MicroManipulatorStepper · ★ 2.2K

It is an open source, low-cost, build-it-yourself motorized XYZ micro-manipulator motion control platform that achieves sub-micrometer precision, intended for optical alignment, probing electronic components, and microscopy.

The all-time top

5 projects · by stars

  1. #1 · francescopace/espectre

    espectre

    ESPectre turns a supported ESP32 into a private, local Wi-Fi motion sensor: it reads how movement changes the Wi-Fi signals in a room and reports motion in real time — no camera, microphone, wearable, or dedicated radar hardware needed.

    9.7K
  2. #2 · 0x23/MicroManipulatorStepper

    MicroManipulatorStepper

    It is an open source, low-cost, build-it-yourself motorized XYZ micro-manipulator motion control platform that achieves sub-micrometer precision, intended for optical alignment, probing electronic components, and microscopy.

    2.2K
  3. #3 · LuwuDynamics/xgoduck_hardware

    xgoduck_hardware

    XGO-Duck is a 3D-printable biped robot duck. This repository is the hardware starting point: STL models for the structure, PCB/Altium files for a custom expansion board, a bill of materials, and an illustrated assembly guide.

    1.7K
  1. 4

    keybytes

    420notaroomba/keybytes · C

    Keybytes is an open-source modular mechanical keyboard where every key is its own tiny replaceable PCB (a Keybit) with a built-in RISC-V microcontroller, connected via pogo pins and held together by magnetic cases, with Bluetooth and USB support.

  2. 5

    InkBoy

    174kuslota/InkBoy · C

    InkBoy is firmware that runs Game Boy games on a Waveshare ESP32-S3 e-paper board at about 30 fps, with dithered black-and-white or four-shade grayscale rendering.

Often tagged together