Ink Node
Forked and customized from https://github.com/smartcontracts/simple-optimism-node
A Docker Compose setup for running an Ink node on the repository's current
op-geth-based stack, plus the supporting healthcheck and monitoring services.
Current Status
This repository currently ships an op-geth execution client. The instructions
below are the current op-geth runbook for this Compose stack, not the
long-term recommendation.
Per Optimism, op-geth support ends on May 31, 2026, and nodes still running
it at the L1 Glamsterdam hardfork will not be able to follow the canonical
chain. op-node is not being deprecated. See the
op-geth deprecation notice
and the
op-reth configuration guide.
If you operate a production or long-lived node, start planning an op-reth
migration now. Run it in parallel, validate it over a meaningful window, and
prepare a fresh snapshot before the hardfork window. Treat this as an
operator-owned migration rather than something to delay until a later
sequencer-side client switch.
This repository does not yet ship an op-reth Compose path. Before it can, the
repo still needs:
- a validated
op-reth service, image, and entrypoint in docker-compose.yml
- an
op-node engine endpoint that no longer points at http://op-geth:8551
- archive init and snapshot handling that can consume
op-reth snapshots where
available. The checked Sepolia Ink Gelato index already exposes
reth/full/datadir artifacts, but this repo does not use them yet and the
checked mainnet Ink index still only exposes geth archives
- healthcheck and monitoring updates, which still target
op-geth and the
opgeth InfluxDB database
- env and port naming that no longer assumes
op-geth, such as
PORT__OP_GETH_* and envs/*/op-geth.env
Recommended Hardware
Mainnet
- 16GB+ RAM
- 2 TB SSD (NVME recommended)
- 100 Mbps+ download
Testnet
- 16GB+ RAM
- 500 GB SSD (NVME recommended)
- 100 Mbps+ download
Prerequisites
- Docker Engine and Docker Compose v2 on Linux, or Docker Desktop on macOS and
Windows
- Working L1 execution RPC and L1 beacon API endpoints for the Ethereum network
that matches your target Ink network
- Enough free disk for your chosen node type
On Apple Silicon, the healthcheck sidecar runs as linux/amd64. Docker
Desktop handles this automatically, but the first startup can take longer.
Ubuntu install
If you are not logged in as root, log out and back in after adding yourself to
the docker group.
sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get install -y curl gnupg ca-certificates lsb-release
sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
sudo apt-get update
sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-compose-plugin
sudo usermod -aG docker $(whoami)
Verify Docker after logging back in:
docker ps
Quick Start
1. Clone the repo
git clone https://github.com/inkonchain/node
cd node
2. Copy the env template
cp .env.example .env
3. Edit .env
For the lowest-friction first run on the current op-geth stack, start with
ink-sepolia and a full node:
NETWORK_NAME=ink-sepolia
NODE_TYPE=full
OP_NODE__RPC_ENDPOINT=<your Sepolia execution RPC>
OP_NODE__L1_BEACON=<your Sepolia beacon API>
OP_NODE__RPC_TYPE=basic
HEALTHCHECK__REFERENCE_RPC_PROVIDER=https://rpc-gel-sepolia.inkonchain.com
Configuration notes:
NETWORK_NAME: ink-sepolia or ink-mainnetNODE_TYPE=full: starts from an empty local datadir. This is the validated
first-run path in this repoNODE_TYPE=archive: resolves the newest archival geth datadir for the
current op-geth stack from the Gelato ChainSnap index for your network,
downloads the matching .sha256, verifies the archive, and extracts it
during bedrock-initOP_NODE__RPC_TYPE=basic: the right default for generic providers; use
alchemy, quicknode, or erigon only when your provider requires it.env overrides the same variable for services that load .env in
docker-compose.yml, including op-geth, op-node, healthcheck, and
bedrock-initenvs/<network>/op-node.env already supplies the network P2P defaults, so
most first-time setups only need the .env values abovePORT__OP_NODE_P2P changes the published host port in docker-compose.yml.
The in-container op-node listener still uses 9003- For
ink-mainnet, switch the healthcheck reference RPC to
https://rpc-gel.inkonchain.com
- Advanced wrapper inputs such as
OVERRIDE_HOLOCENE and EXTENDED_ARG live
in .env.example. The shell entrypoints append them to both op-geth and
op-node, so leave them empty unless you know the flag is compatible with
the process you want to change
4. Start the stack
docker compose up -d --build
This pulls the service images, builds the local bedrock-init image, creates a
JWT, and starts:
bedrock-init (one-time init)op-geth (current execution client in this repo)op-nodehealthcheckprometheusgrafanainfluxdb
op-geth and op-node both wait for bedrock-init to create
/shared/initialized.txt. If the stack looks stuck, check bedrock-init
first.
Validate Startup
Check service status
docker compose ps
Expect the long-running services to be Up. bedrock-init is a one-time init
container, so it will usually disappear from default docker compose ps output
once it exits. If you want to confirm it finished successfully, run
docker compose ps -a and check that bedrock-init exited with code 0.
Check the key logs
docker compose logs --tail 50 bedrock-init op-geth op-node
Good startup signals:
bedrock-init on first boot: Creating JWT... and Creating Bedrock flag...bedrock-init on restart with existing volumes: Bedrock node already initializedop-geth: HTTP server startedop-node: Rollup node started
Smoke test the RPC endpoints
Execution RPC for the current op-geth service:
curl -fsS -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"eth_chainId","params":[],"id":1}' http://127.0.0.1:9993
Rollup node RPC:
curl -fsS -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"rpc_modules","params":[],"id":1}' http://127.0.0.1:9545
On ink-sepolia, a healthy reply includes the optimism, opp2p, and
health modules.
Sync status:
curl -fsS -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"optimism_syncStatus","params":[],"id":1}' http://127.0.0.1:9545
On a brand-new full node, this is the best early signal that the rollup node
is moving forward. Look for current_l1 and head_l1 values to advance even
while local L2 block height is still 0x0.
Healthcheck metrics:
curl -fsS http://127.0.0.1:7300/metrics | grep -E 'healthcheck_(reference_height|target_height|height_difference)'
On a brand-new full node, eth_blockNumber can stay at 0x0 for a while.
That is expected. During that window it is also normal for
healthcheck_target_height to stay at 0. Use optimism_syncStatus and the
healthcheck metrics to confirm the node is moving forward during early sync.
Open Grafana
Grafana is available at http://localhost:3000.
- Username:
admin
- Password:
ink
The preloaded dashboard is Simple Node Dashboard.
Operating The Node
View logs
docker compose logs -f --tail 50
Or for a single service:
docker compose logs -f --tail 50 op-node
Stop
docker compose down
This stops the stack without removing data volumes.
Restart
docker compose restart
Upgrade
git pull
docker compose pull
docker compose up -d --build
Wipe All Data
docker compose down -v
This removes all local chain and monitoring data.
Monitoring
Estimate remaining sync time
progress.sh uses Foundry's cast on the host machine.
The bedrock-init container installs Foundry for its own image build, but that
does not make cast available on your host shell. Install Foundry locally if
you want to use progress.sh.
Install Foundry from https://getfoundry.sh/ and then
run:
./progress.sh
On a brand-new full node, ./progress.sh can return Error: Not syncing
while eth_blockNumber is still 0x0. In that phase, use
optimism_syncStatus and the healthcheck metrics from the validation section,
then retry the script after the local block height starts moving.
If you do not want to install cast, use the RPC and metrics checks above
instead.
P2P endpoints
The op-node bootstrap and static peers for each network are already set in
envs/<network>/op-node.env, so a clean checkout needs no manual peering setup.
The values below are execution-layer peers and are not used by the current
stack: op-geth runs with --maxpeers=0 --nodiscover, because op-node runs
--syncmode=consensus-layer and payloads arrive over the Engine API. They are
recorded here as the reference for the op-reth migration described in
Current Status.
op-reth --bootnodes, both networks:
enode://ca2774c3c401325850b2477fd7d0f27911efbf79b1e8b335066516e2bd8c4c9e0ba9696a94b1cb030a88eac582305ff55e905e64fb77fe0edcd70a4e5296d3ec@34.65.175.185:30305?discport=30305
enode://dd751a9ef8912be1bfa7a5e34e2c3785cc5253110bd929f385e07ba7ac19929fb0e0c5d93f77827291f4da02b2232240fbc47ea7ce04c46e333e452f8656b667@34.65.107.0:30305?discport=30305
enode://c5d289b56a77b6a2342ca29956dfd07aadf45364dde8ab20d1dc4efd4d1bc6b4655d902501daea308f4d8950737a4e93a4dfedd17b49cd5760ffd127837ca965@34.65.202.239:30305?discport=30305
op-reth --trusted-peers, mainnet:
enode://61164c944eba34a2d4f50682fd71fa966df42ffcf32bd962810c004acf47f574efd6d0d293bd7c6ffe964524468a98f1cd9427dca2bf54dcfa375d34e5a25fc7@34.178.90.179:30304?discport=30303
enode://3812d9e130a2f45761431935f0e2ad4a12e9389772a96e4e83e48a38722b44f02af7df32204a7a6f6fa91c38f7ba12a03178a7c6d5624dc45f87a79d076a95cb@34.6.15.128:30304?discport=30303
enode://b708474c6db25e99320daebd2d9a8b29139a676fad976e134eb6ca6271d7525510a361efe1b0828e9288b3d33cb8edcb602d8aea335fab086ad6e38251775f91@34.178.42.30:30304?discport=30303
op-reth --trusted-peers, sepolia:
enode://9978a50acf8f7c30c8cbd657a653c2faaf4033c62c9f288a2ae88b31ac121cf5c419788d4f0b45cc5fd75d05e29bd05f59c0c5339b6726c9ea41bca4108f4bcc@34.6.8.218:30304?discport=30303
enode://8e23c7c584b7b0808269dc74f825d68daa0df2a331c92b0c4c638b951607affa4ea614098f98791b68c73922ebbe146a5ae1e40a8d158babb372e11433091499@34.141.131.99:30304?discport=30303
enode://c2dd4ad2f3f5dd2e3d6c77acbb4f96a73d692f3172181caf457863bd9ac0645c4b709b98e8c2fa6e6d218135268635d85224b2623480290ac4dad22f0cb31b4b@35.204.224.2:30304?discport=30303
Troubleshooting
bedrock-init exits quickly on a full node
That is expected. full nodes do not download a snapshot. If you want a
snapshot restore path, switch to NODE_TYPE=archive.
bedrock-init says Bedrock node already initialized
That means the stack is reusing existing Docker volumes. This is expected on
restarts. If you intentionally want a clean first-boot flow, wipe the volumes:
docker compose down -v
bedrock-init takes a long time on an archive node
That is expected while the snapshot is downloading and extracting. Check:
docker compose logs -f bedrock-init
If image pulls or snapshot downloads fail, make sure the host can reach:
docker.ious-docker.pkg.devink.t.snapshots.gelato.cloudink.snapshots.gelato.cloud
Archive geth snapshots for the current stack are resolved from these indexes:
bedrock-init downloads the matching .sha256 file and verifies the archive
before extraction. This is still a geth datadir path, not an op-reth
bootstrap flow.
At the time of this docs refresh, the Sepolia Ink Gelato index also exposes
reth/full/datadir artifacts, but the checked mainnet Ink index does not yet
show reth artifacts. This repository does not consume those reth snapshots
yet.
If bedrock-init exits with Failed to resolve latest snapshot or
Unexpected snapshot filename format, the index is unreachable or its format
changed. Switch back to NODE_TYPE=full and retry, or pick a direct archive
from the index page and update the script before retrying.
If bedrock-init exits with Unexpected checksum file format,
Checksum file does not match downloaded archive, or SHA256 verification failed, do not reuse that download. Retry later or verify the checksum file
from the index page before attempting another restore.
eth_blockNumber stays at 0x0 right after startup
That is normal for a fresh full node. Check the rollup node instead:
curl -fsS -X POST -H "Content-Type: application/json" --data '{"jsonrpc":"2.0","method":"optimism_syncStatus","params":[],"id":1}' http://127.0.0.1:9545
./progress.sh says Error: Not syncing
That is expected during the earliest part of a fresh full node bootstrap. The
script samples eth_blockNumber twice over 10 seconds, so it cannot estimate
sync speed until the local execution client starts importing blocks. Use
optimism_syncStatus and the healthcheck metrics first, then retry later.
op-node cannot connect to L1
Double-check:
OP_NODE__RPC_ENDPOINTOP_NODE__L1_BEACONOP_NODE__RPC_TYPE
Then restart the stack:
docker compose down
docker compose up -d --build
error dialing static peer appears in op-node logs
That can happen during early bootstrap if a configured static peer is
temporarily unavailable. If those errors continue against every configured peer,
inspect envs/<network>/op-node.env and your outbound network access; stale peer
endpoints are the usual cause. Note that current_l1 can keep advancing with
zero peers, since the node still derives the safe chain from L1 — check
opp2p_peerStats.connected to confirm P2P health.
Walking back L1Block appears in the logs
A few reset lines during first startup are normal. If the node keeps printing
them without any L1 progress, verify the L1 endpoints above and restart the
stack.
这是一个用于运行 Ink 节点的 Docker Compose 配置。Ink 是基于 OP Stack 构建的以太坊 L2 网络，该配置包括执行客户端、rollup 节点和监控组件。