# HermesEnabler (pookjw/HermesEnabler)

> A tool that enables Hermès Watch Faces on any Apple Watch, letting you install Hermès-branded watch faces that Apple normally restricts.

- GitHub: https://github.com/pookjw/HermesEnabler
- GitHub.Locker page: https://github.locker/pookjw/HermesEnabler
- Stars: 2.2K
- Language: Objective-C
- License: MIT
- Last push: 2026-11-16

## Questions and answers

Written by GitHub.Locker from the README and the repository; check the README below for details.

**Is this installed on my iPhone or on my Apple Watch?**

Both: you install the IPA via Sideloadly, then the companion app goes to your iPhone's Watch app, and you run the app on the Apple Watch itself to finish the setup.

**How do I get it running?**

Either download the IPA from Releases and sideload it with Sideloadly, or build it yourself by opening HermesEnabler2.xcodeproj in Xcode and running it on your Apple Watch as the destination.

**Do I need Xcode or Sideloadly first?**

Sideloadly is needed for the IPA route; Xcode is needed only if you build from source. Either way, you need an Apple Watch paired with an iPhone.

**Will it work on my watchOS version?**

No, not on every version. It is supported only on watchOS 27.0 through 27.3 beta 1, so check your watch's version before installing.

**Does it run on Apple Watch only?**

It targets Apple Watch and the iPhone Watch app for installation; the app runs on the watch and is set up from the iPhone side.

**Can I use it freely?**

The project is MIT licensed, but the README warns to use it at your own risk and notes it incorporates code from Gester.

**What is the main feature?**

It unlocks Hermès watch faces so they can be installed on Apple Watch models that would otherwise not get them, within the supported watchOS range.

**Where does the code come from?**

The README says the project incorporates code from Gester, which is credited in the Credits section.

**Is it available in many languages?**

Yes, the README is translated into English, Korean, Simplified and Traditional Chinese, Japanese, Spanish, French, German, and Portuguese.


---

## README (checked against GitHub 2026-11-18)

Source: https://github.com/pookjw/HermesEnabler/blob/main/README.md

# HermesEnabler 2

[English](README.md) · [Tiếng Việt](README.vi.md) · [한국어](README.ko.md) · [简体中文](README.zh-CN.md) · [繁體中文](README.zh-TW.md) · [日本語](README.ja.md) · [Español](README.es.md) · [Français](README.fr.md) · [Deutsch](README.de.md) · [Português](README.pt.md)

![](image.png)

> Supported on watchOS 27.0 through 27.3 beta 1.
> If you’re using an unsupported watchOS version, use [Clocky](https://github.com/pookjw/Clocky).

## Installation

### macOS

On macOS you can install the prebuilt IPA with Sideloadly or build the app directly with Xcode. Either way, the iPhone must be paired with the target Apple Watch, and the Watch must run a supported watchOS version.

#### Install the IPA

1. Download the IPA from [Releases](https://github.com/pookjw/HermesEnabler/releases).
2. Install [Sideloadly](https://sideloadly.io) on your Mac, connect your iPhone with a cable, and select it in Sideloadly.
3. Drag the IPA into Sideloadly and enter your Apple ID. Turn off **Use automatic bundle ID**, set a fixed Bundle Identifier, and start signing.
4. On the iPhone, open **Settings → General → VPN & Device Management** and trust your developer certificate.
5. On the iPhone, open **Settings → Privacy & Security → Developer Mode**, turn it on, restart, and confirm.
6. On the iPhone, open the **Watch** app, go to **My Watch → Apps**, and install **HermesEnabler2** on the Watch.
7. On the Apple Watch, open **Settings → Privacy & Security → Developer Mode**, turn it on, restart, and confirm. If the option is not shown, install the Watch app first and check again.
8. Open **HermesEnabler2** on your Apple Watch and follow the steps in the app.

#### Build with Xcode

1. Open [HermesEnabler2.xcodeproj](HermesEnabler2.xcodeproj) in Xcode.
2. Select your Apple Watch as the run destination and click **Run**.
3. Open **HermesEnabler2** on your Apple Watch and follow the steps in the app.

### Windows

Windows uses [WatchBridge](https://github.com/AdminZachary/iloader-for-windows), a community tool that prepares Developer Mode and installs an IPA containing both an iPhone host app and a Watch app. It is not affiliated with Apple or with this project.

1. Install **Apple Mobile Device Service** by installing [iTunes](https://www.apple.com/itunes/) or the **Apple Devices** app from the Microsoft Store. WatchBridge needs it for USB and Wi-Fi communication. WebView2 is built into Windows 11.
2. Make sure your iPhone is paired with the target Apple Watch. WatchBridge supports only one paired Watch at a time; if more than one is paired, the preparation step stops instead of guessing.
3. Download `watchbridge-windows.zip` from [WatchBridge Releases](https://github.com/AdminZachary/iloader-for-windows/releases/latest), extract it, and run `WatchBridge.exe`. The executable is unsigned, so Windows SmartScreen may warn on first launch.
4. Download the IPA from [Releases](https://github.com/pookjw/HermesEnabler/releases). Use the original IPA that contains both the iPhone host and the `Watch/*.app`; Watch-only packages are not supported.
5. Connect the paired iPhone over USB and select it in WatchBridge.
6. Pair the Watch and confirm the trust prompt on the Watch. Request the **Developer Mode** switch, then on the Watch open **Settings → Privacy & Security → Developer Mode**, turn it on, restart, and confirm. Return to WatchBridge and click **Check again**. WatchBridge does not enable Developer Mode or restart the Watch for you.
7. Sign in with your Apple ID, select the HermesEnabler2 IPA, and start signing and installation. WatchBridge installs the iPhone host app first, then the Watch app.
8. Open **HermesEnabler2** on your Apple Watch and follow the steps in the app.

> Developer-mode preparation requires a USB connection. After pairing over USB once, installs and renewals can use Wi-Fi.

## Cautions

- watchOS 26 is not supported.
- In Sideloadly, disable **Use automatic bundle ID** and use a fixed Bundle Identifier. Keep the same Bundle Identifier and Apple ID for every update so the app can retain its existing data and backup.
- If the iPhone app installs but the Watch app does not appear, check the Sideloadly log for `Watch apps will be stripped from the IPA`. This means the embedded Watch app was removed; installing the iPhone app alone will not install it. Use Xcode to install the Watch app.
- Before deleting the app, always restore your MobileGestalt backup through the HermesEnabler2 app.

## Credits

This project incorporates code from [Gester](https://github.com/sasobhabha/Gester).

Use at your own risk.

